CSIA-CERTIFIED | LICENSED & INSURED | CONNECTICUT

Heavy-Duty Chimney Liner Installation, Relining & Flue Repair in Connecticut

Protect your home against carbon monoxide intrusion, flue tile deterioration, and chimney fires. Armstrong Chimney Services engineers custom-fitted, UL-listed stainless steel and cast-in-place liner systems with lifetime warranties across Connecticut.

The Flue Liner: The Unsung Guardian of Your Home

The chimney flue liner is the interior protective conduit that channels smoke, unburned hydrocarbons, sulfur dioxide, water vapor, and lethal carbon monoxide out of your home. It performs three vital functions:

  1. It shields combustible wall framing from high flue temperatures (preventing thermal bridging and frame ignition).
  2. It protects the structural brick and mortar joints from the corrosive acids created during combustion.
  3. It provides a smooth, correctly sized aerodynamic column that sustains strong drafting pressure.

In Connecticut, older homes often have unlined chimneys or shattered terra cotta clay tile liners. An unlined or cracked chimney is a significant fire risk and a common source of carbon monoxide intrusion. Armstrong Chimney Services specializes in retrofitting damaged flues with indestructible, high-efficiency stainless steel relining systems.

Types of Chimney Liners We Install and Service

HIMNEY LINING TECHNOLOGY MATRIX        

316Ti TITANIUM-STABILIZED STAINLESS STEEL (FLEXIBLE & RIGID)

All-Fuel: Wood, Coal, Oil, and Category I Gas appliances.
Resists high-temperature acid corrosion; lifetime transferable

304-GRADE STAINLESS STEEL

Optimized strictly for wood-burning fireplaces and dry stove operations
Exceptional thermal shock resistance during high-heat chimney fires.

AL29-4C SUPER-FERRITIC STAINLESS STEEL

Dedicated to high-efficiency, condensing gas boilers and furnaces.
Immune to extreme chemical pitting from acidic condensate.

CAST-IN-PLACE CERAMIC / THERMOCRETE LINERS

Restores historic masonry flues without opening interior walls.
Fills all voids, adds structural strength to aging chimneys.

Stainless Steel Chimney Liner Installation

Our flexible and rigid 316Ti stainless steel liners are alloyed with titanium to resist aggressive sulfuric acids created by New England home heating oil and the high thermal spikes of woodstoves. Every liner is wrapped in a 1/2-inch ceramic fiber insulation blanket, sealed with high-temp foil, and held in place by exterior stainless steel mesh to satisfy strict zero-clearance safety codes.

Clay Flue Tile Liner Repair & Joint Resurfacing

If your clay tile segments are intact but the mortar joints between them have washed away or eroded, we deploy the innovative Joint Shield and ceramic resurfacing systems. This process coats and seals degraded flue joints without reducing the flue’s draft diameter.

Furnace & Oil Boiler Flue Relining

When replacing an older heating unit with a high-efficiency boiler or furnace, the oversized masonry flue often can’t stay warm enough. Exhaust gases cool prematurely, condensing into a destructive hydrochloric and sulfuric acid wash that eats through mortar joints. Installing a correctly sized stainless steel liner maintains draft velocity and stops acid rot inside your home.

Chimney Liner Cleaning & Annual Maintenance

Stainless steel liners require specialized maintenance. Standard wire brushes will scratch and ruin stainless steel surfaces, creating rust points. Armstrong Chimney Services uses poly-bristle brushes and rotary whip systems to clean your liner without compromising the metal’s protective passivation layer.

The 5-Phase Armstrong Relining Process

Step 1
ideo Scan

Full HD camera scan to

Step 2
Prep Flue

Remove old broken clay

Step 3
Insulate

rap liner in 1/2

Step 4
Winch Install

Pull liner safely into

Step 5
Seal & Cap

Fit top-plate, storm

Precision Sizing & HD Video Scan

We calculate the appliance BTU exhaust requirements to determine the exact liner diameter needed.

Flue Preparation & Tile Clearing

We mechanical-cut broken clay fragments and remove creosote from the flue walls to ensure a clean path.

Thermal Insulation Wrap

We install high-density ceramic fiber blankets around the liner to retain heat, boost draft efficiency, and protect adjacent framing.

Precision Pulling & Mechanical Anchoring

Using mechanical winches, we smoothly lower the insulated liner through the chimney column, securing it with bottom tee-connections and structural brackets.

Top-Plate & Chimney Cap Sealing

We seal the chimney top with a 100% stainless steel drip-edge top plate and a heavy-duty spark-arrestor cap, guaranteeing a weatherproof seal.

Frequently Asked Questions (FAQs)

Why does my heating system need a new chimney liner if it worked before?

Modern high-efficiency furnaces extract more heat into your home, leaving flue gases cooler. When these cooler gases hit an oversized, uninsulated chimney, they condense into corrosive liquid acids. A custom-sized insulated liner keeps exhaust warm, ensuring proper venting and protecting your masonry.

Our 316Ti titanium-stabilized stainless steel liners are engineered to last a lifetime. They carry manufacturer lifetime transferable warranties and resist weathering and acid corrosion when serviced regularly.

Yes. Our flexible stainless steel liners bend smoothly around structural chimney offsets while maintaining a continuous, airtight interior diameter.

Signs of a compromised liner include bits of terra cotta clay falling into your fireplace, white salt-like stains on exterior bricks, strange sulfur smells, and drafting issues. An internal video scan during our $69 inspection will pinpoint any flaws.

Protect Your Home with a Lifetime Venting Solution

Schedule Your Chimney Relining Consultation Today!

Do not let a damaged flue threaten your family’s safety. Get your chimney relined by Connecticut’s trusted chimney experts.