CSIA-CERTIFIED | LICENSED & INSURED

Chimney Construction & Fireplace Installation in Connecticut

Expert chimney construction and installation combining craftsmanship, safety, and lasting performance.

Architectural Excellence Meets High-Performance Thermodynamics

Building a chimney is an exact science. A properly designed chimney must do more than stand straight—it must maintain continuous positive draft velocity, manage extreme heat expansion, withstand high winds, and shed gallons of rainwater. Flaws in foundation footing design, flue-to-firebox ratios, or combustible framing clearances lead to chronic smoke spillage, poor combustion efficiency, and serious house fire hazards.

Armstrong Chimney Services brings decades of engineering and master masonry experience to your project. We design and install custom masonry chimneys, manufactured chimney stacks, gas venting systems, and freestanding wood/pellet stoves across Connecticut.

Chimney Constructions

Our Professional Chimney Installation Capabilities

CUSTOM MASONRY CONSTRUCTION

Brick, Granite, New England Fieldstone, Concrete Block Core, Custom Hearths

ZERO-CLEARANCE & FACTORY-BUILT SYSTEMS

High-Efficiency Fireplaces, Metal Chase Enclosures, Insulated Wall Pass-Thrus

CLASS-A DOUBLE & TRIPLE-WALL VENTING

All-Fuel Stainless Steel Chimneys for Woodstoves, Pellet Stoves & Boilers

EXTERIOR ACCESSORIES

| Custom Stone & Copper Chimney Caps, Chase Tops, Snow Crickets, Energy Dampers|

Custom Masonry Chimney Construction

We build site-built masonry chimneys from the footing up. Using reinforced structural concrete footings, ASTM C-270 mortar formulations, premium firebrick cores, and exterior hand-selected brick, slate, or authentic New England fieldstone, our masonry projects become stunning architectural centerpieces that enhance your property’s value.

Class-A Factory-Built Chimney Systems

For homes without an existing masonry foundation, we engineer Class-A double-wall and triple-wall insulated all-fuel chimney systems. Constructed from 304 and 316-grade stainless steel with dense mineral wool insulation, these systems provide rapid draft warm-up and can be routed vertically through home interiors or mounted along exterior framing.

Zero-Clearance (ZC) Fireplace Installations

Want the comfort of a fireplace without the structural weight of concrete footings? We install EPA-certified, high-efficiency zero-clearance fireplaces. Encased in insulated chase cabinets and finished with natural stone veneer or custom timber mantels, these systems deliver optimal room-heating performance with minimal wall clearances.

Heating Appliance Flue Connections & Direct-Vent Routing

Installing a new high-efficiency heating boiler, furnace, or gas fireplace? Modern condensing appliances produce acidic exhaust that destroys unlined chimneys. We install dedicated, code-compliant stainless steel, AL29-4C, or direct-vent coaxial venting tailored to your equipment’s exact BTU specifications.

The Armstrong Engineering & Installation Framework

Phase 1: Blueprint & Calculations

Drafting, flue sizing ratios (10:1 firebox to flue rule), local CT code filings & permits.

Phase 2: Footing & Structural Preparation

Poured concrete foundations exceeding 3,000 PSI below the regional winter frostline.

Phase 3: Masonry & Venting Assembly

Laying refractory firebrick, centering flue tiles, maintaining 2" clearance to combustibles.

Phase 4: Weatherproofing, Flashing & Capping

Installing counter flashing, custom crowns, spark arrestors, and siloxane moisture barriers.

Phase 5: Commissioning & Safety Certification

Full-draft test burn, smoke evacuation monitoring, and final inspection sign-off.

Frequently Asked Questions (FAQs)

What is the 3-2-10 chimney rule, and why is it critical during installation?

The NFPA 211 3-2-10 Rule mandates that a chimney must terminate at least 3 feet above the highest point where it passes through the roof, and must be at least 2 feet higher than any portion of the building within a 10-foot horizontal radius. This prevents wind downdrafts and keeps roof sparks away from shingles.

A standard two-story exterior masonry chimney takes 4 to 7 working days, depending on weather, foundation prep, and the complexity of the selected stone or brick. Factory-built Class-A systems are typically installed and fully commissioned within 1 to 2 days.

Yes. All new chimney installations, structural rebuilds, and direct heating exhaust additions require building permits under the Connecticut State Building Code. Armstrong Chimney Services handles the entire permitting and inspection process for you.

Yes. With factory-built zero-clearance fireplaces and Class-A double-wall insulated stainless steel pipe, we can safely install a stunning fireplace in virtually any room, routing the chimney chase up through interior closets or along exterior siding.

Invest in Superior Chimney Construction

Build Your Dream Fireplace & Chimney with Armstrong!

Work with Connecticut’s dedicated chimney engineers and master masons. Call today for a comprehensive, on-site installation consultation.